Canon L240 User Manual Download Page 105

Page: 105 / 212

8-5

Receiving Faxes

Chapter 8

Recei

Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode

Set this mode if you only have one telephone line for fax and telephone use and want
your FAX to automatically switch between fax and voice calls.

Setting Fax/Tel Mode

Follow this procedure to set the receive mode to

(Fax/Tel Mode):

Note

For this mode, you need to connect the optional handset or a telephone to your FAX
(

p. 2-6).

Open the one-touch speed dial panel.

Press Data Registration.

Press Set.

Use

▼

▲

to select

Press Set.

Use

▼

▲

to select

Press Set.

Use

▼

▲

to select

Press Set.

•

To set the options for

(Fax/Tel Mode), see the following

pages.

Press Stop to return to standby mode.

Confirm that FaxTel is displayed in the LCD.
•

If FaxTel is not displayed, press Receive
Mode to select Fax/Tel Mode. After a
few seconds, the LCD returns to standby
mode.

Ex:

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands