Canon L240 User Manual Download Page 174

Page: 174 / 212

13-20

Troubleshooting

Chapter 13

General Problems

■

FAX has no power.

The power cord may not be plugged in securely.
•

Check that the power cord is plugged securely into the FAX and into the wall
outlet (

p. 2-8). If the unit is plugged into a power strip, make sure the

power strip is plugged in and turned on.

The power cord may not be supplying power.
•

Check the power cord by substituting with another, or by using a voltmeter
to test it for continuity.

■

Nothing appears in the LCD.

The power cord may not be plugged in securely.
•

Check that the power cord is plugged securely into the FAX and into the wall
outlet (

p. 2-8). If the unit is plugged into a power strip, make sure the

power strip is plugged in and turned on. If the LCD remains blank, unplug
the unit and wait five seconds, then plug it back in. If the LCD still remains
blank, contact your local authorised Canon dealer or the Canon help line.

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands