Canon L240 User Manual Download Page 149

Page: 149 / 212

12-5

Maintenance

Chapter 12

Mai

tenanc

Cleaning the Scanner Components

Follow this procedure to periodically check and clean the scanner components:

Disconnect the power cord from the
FAX.

Use both hands to gently open the
operation panel.

•

It only opens partially.

While holding the operation panel
open, clean these components:

❏

Separation guide and separation
roller:
Wipe with a clean, soft, dry, lint-
free cloth.

❏

White sheet and scanning glass:
Wipe with a clean, soft, lint-free
cloth moistened with water, then
wipe with a clean, soft, dry, lint-
free cloth.

Clean the underside of the operation
panel (shaded area in the illustration).

•

Dirt and dust particles that collect
on the underside of the operation
panel affect the quality of the
documents you copy or send.

SEPARATION
ROLLER

SCANNING GLASS

WHITE SHEET

SEPARATION GUIDE

Note

•

If the scanner components are
dirty, the documents you send or
copy will also be dirty.

•

Be sure to use a soft cloth to
avoid scratching the components.

•

Do not use tissue paper, paper
towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands