Canon L240 User Manual Download Page 76

Page: 76 / 212

6-16

Speed Dialling

Chapter 6

Using Speed Dialling

Once you have registered fax/telephone numbers for one-touch speed dialling
(

p. 6-3), coded speed dialling (

p. 6-8), or group dialling (

p. 6-13), you can

begin to send documents or make telephone calls with speed dialling.

Sending a Document With Speed Dialling

Follow this procedure to send a document using one-touch speed dialling, coded
speed dialling, or group dialling:

Load the document, face down in the ADF
(

p. 4-3).

•

To adjust the resolution and contrast,
see pp. 7-2, 7-3.

•

You may be unable to send if the memory
used (shown in the LCD) is close to

. To free up space in the FAX’s

memory: print, send, or delete any
documents you no longer need to be
stored in memory (

p. 9-5).

Enter the one-touch speed dialling button or
coded speed dialling code assigned to the fax
number or group you want to send to.

❏

One-touch speed dialling button:
Press the one-touch speed dialling button
you want.

❏

Coded speed dialling code:
Press Coded Dial, then use the numeric
buttons to enter the two-digit code you
want.
•

If you make a mistake, press Stop
and repeat this step.

•

appears if no fax/

telephone number or group is
assigned to the speed dialling button
or code you pressed.

Press Start/Copy to begin scanning for
sending, or wait a few seconds for the FAX to
begin scanning automatically.

•

If you do not want the FAX to begin
scanning automatically after a few
seconds, disable the TIME OUT setting
(

p. 14-6).

Ex:

(Currently used memory)

(Standby to scan)

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands