Canon iR6570 series, Service Manual

Page: 325 / 684

Chapter 8
8-61
1) Slide out the right deck / cassette3 / cassette4.
2) Open the right upper cover and the right lower cover.
An attempt to remove the pickup assembly without removing the deck
will cause the lifter to get trapped, not holding the pickup assembly from
sliding out.
3) Remove the mounting screw [1], and detach the connector cover [2];
then, disconnect the connector [3].
4) Remove the three mounting screws [4], and detach the pickup
assembly [5].
F-8-171
8.10.20.2 Removing the Left Pickup Assembly
0009-5112
1) Slide out the left deck.
2) Remove the two screws [1] found on the left and right sides of the left
deck[2]; then, detach the left deck[2].
F-8-172
3) Open the front cover.
4) Disconnect the connector [1] from inside the machine, and remove
the locking support [2].
F-8-173
5) Remove the two screws [1], and detach the two pickup fixing plates
[2]; then, detach the left deck pickup assembly [3].
Keep supporting the pickup assembly; otherwise, the pickup assembly
could drop when the fixing plate is removed.
F-8-174
8.10.20.3 Removing the Feeding Roller
0009-5109
1) Remove the screw [2], and detach the feeding roller cover [1]. (For
the left deck pickup assembly, skip this step.)
2) Remove the resin E-ring [3] found at the front of the feeding roller.
3)Remove the resin E-ring [4] found at the front and the pickup roller
[5]; then, detach the feeding roller [7] together with the timing belt
[6].
cassette 3/4, right deck pickup assembly
F-8-175
[3]
[4]
[4]
[5]
[1]
[2]
[1]
[1]
[2]
[2]
[1]
[3]
[1]
[1] [2] [1]
[1] [2] [4] [5] [3] [7] [6]