Canon iR6570 series, Service Manual

Page: 313 / 684

Chapter 8
8-49
F-8-117
3) Disconnect the 2 connectors [1], and remove the 2 screws [2]; then,
detach the connector base [3].
F-8-118
4) Remove the 2 screws [1], and detach the waste toner bottle holder [2].
Take care not to spill the waste toner.
F-8-119
8.10.10.6 Removing the Right Deck Pickup Motor
0009-3852
1) Disconnect the connector [2], remove the two screw [1], and detach
the right deck pickup motor [3].
F-8-120
8.10.11 Left Deck Pickup Solenoid
8.10.11.1 Removing the Rear Cover (lower)
0009-3888
1) Remove the 6 screws [1], and detach the rear cover (lower) [2].
F-8-121
8.10.11.2 Removing the High-Voltage Power Supply PCB
0009-3889
1) Remove the 2 screws [1], and detach the 2 grounding wires [2].
2) Disconnect the 9 connectors [3].
3) Remove the 4 screws [4], and detach the high-voltage power supply
PCB [5].
[1] [1]
[2]
[3]
[2]
[1] [3]
[1]
[1]
[2]
[1] [1] [2] [3]
[1]
[1]
[2]
[1]
[1]
[1]