Canon iR6570 series, Service Manual

Page: 343 / 684

Chapter 8
8-79
mounting screws [1]; then, attach the timing belt [4].
F-8-254
3) Loosen the two screws [1] that have been tightened temporarily, and
check to make sure that the spring provides tension; then, tighten the
screws [1].
F-8-255
At the end, be sure the timing belt has tension.
8.10.27.6 Removing the Duplexing Feeding Left Motor
0009-5169
1) Disconnect the connector [1], and remove the two screws [2]; then,
detach the duplex feeding left motor [3].
F-8-256
8.10.27.7 Removing the Duplex Feeding Right Motor
0009-5170
1) Disconnect the connector [1], and remove the two screws [2]; then,
detach the duplex feeding right motor [3].
F-8-257
8.10.27.8 Removing the Duplex Pre-Registration Sensor
0009-5172
1) Remove the two mounting screws [1], and detach the cover [2].
F-8-258
2) Remove the two mounting screws [1], and detach the sensor together
with its base [2].
F-8-259
3) Disconnect the connector [1], and remove the sensor [2].
[1]
[1]
[4]
[2]
[3]
[1]
[2] [2] [3]
[1]
[1]
[2] [2] [3]
[2]
[1]
[1] [1] [2]