Canon iR6570 series, Service Manual

Page: 87 / 684

Chapter 2
2-29
2.7 Installing the NE Controller
2.7.1 Installing the NE Controller-A1
0009-2246
The following are installation steps specific to iR6570/5570 series.
Refer to the Installation Manual included with the NE controller-A1 for various settings, operations check, and points to note.
1) Remove the upper cover of the controller (refer to the Installation Manual).
2) Connect the AC adapter plug to the controller (refer to the Installation Manual).
3) Remove the 4 screws [1], and detach the blanking plate [2] of the rear upper cover.
F-2-89
4) Draw out the cable [1] for the controller, and connect it to the controller cable [2].
F-2-90
5) Attach the controller [1] to the rear upper cover with the 4 screws [2]. (Use the screws included with the NE controller-A1.)
[2]
[1]
[1] [2]