Canon imageRUNNERC1022, Service Manual

Page: 476 / 534

Chapter 18
18-60
T-18-78
18.4.3 NUM
18.4.3.1 NUM List
0020-2022
imageRUNNER C1022 / imageRUNNER C1022i
T-18-79
18.4.3.2 NUM List
0025-8402
Color imageRUNNER C1030 / Color imageRUNNER C1030iF
T-18-80
Registration mode of menu switch
Number Parameter Description of the selection
05 ON/OFF of NL equalizer 0: OFF, 1: ON
06 Telephone line monitor 0: DIAL, 1: SERVICEMAN1, 2: SERVICEMAN2, 3: OFF
07 Delivery level (ATT) 0-15
08 Upper limit of V.34 modulating speed 0: 3429BAUD, 1: 3200BAUD, 2: 3000BAUD,
3: 2800BAUD, 4: 2743BAUD, 5: 2400BAUD
09 Upper limit of V. 34 data speed (Unit: kbps)
0: 33.6, 1: 31.2, 2: 28.8, 3: 26.4, 4: 24.0,
5: 21.6, 6: 19.2, 7: 16.8, 8: 14.4, 9: 12.0,
10: 9.6, 11: 7.2, 12: 4.8, 13: 2.4
10 Frequency of pseudo CI signal 0: 50 Hz, 1: 25 Hz, 2: 17 Hz
Numeric parameter setting mode
Number Parameter Available setting range
02 RTN delivery condition X 1 to 99%
03 RTN delivery condition n 2 to 99 times
04 RTN delivery condition m 1 to 99 lines
05 NCC pause time (before ID code) 1 to 60 s
06 NCC pause time (after ID code) 1 to 60 s
10 T.30 T0 timer Generally 55s
11 T.30 T1 timer (for receiving) 0 to 9999 (France = 3500, Others = 3000)
12 Maximum number of receiving lines 0 to 65535 (lines) Unlimited for 0
13 T.30 EOL timer 500 to 3000 (Default: 55s)
15 Threshold for hooking and on-hook 0 to 999
16 Time to temporarily response at FAX/TEL switching 0 to 9
17 Pseudo RBT cadence ON time 0 to 999
18 Pseudo RBT cadence OFF time (short) 0 to 999
19 Pseudo RBT cadence OFF time (long) 0 to 999
20 Pseudo ring tone cadence ON time 0 to 999
21 Pseudo CI cadence OFF time (short) 0 to 999
22 Pseudo CI cadence OFF time (long) 0 to 999
23 CNG detection level at FAX/TEL switching 0 to 7
24 Pseudo RBT delivery level at FAX/TEL switching 10 to 20 (100V),
0 to 20 (120/ 230V)
25 CNG monitoring time when answer phone is used 0 to 999
26 Level to detect no-sound when answer phone is used 0 to 7
27 Preamble detection time of V21 low-speed flag 20 (* 10ms)
51 Threshold value of hook detection 10 to
53 Set the number of DTMF ringing times at FAX remote reception 10 to (Default: 25)
54 Set the transmission time of BusyTone when the handset is used
55 Cycle to obtain data of environment log 0 to 480 min (Default: 60min) (No data is obtained with 0)
56 Select counter type to be displayed at counter 1 101
57 Select counter type to be displayed at counter 2 0 to 999
58 Select counter type to be displayed at counter 3 0 to 999
59 Select counter type to be displayed at counter 4 0 to 999
60 Select counter type to be displayed at counter 5 0 to 999
61 Select counter type to be displayed at counter 6 0 to 999
74 Port number of e-RDS RGW
75 Transmission interval of e-RDS for 3rd party
Numeric parameter setting mode
Number Parameter Available setting range
02 RTN delivery condition X 1 to 99%
03 RTN delivery condition n 2 to 99 times
04 RTN delivery condition m 1 to 99 lines