Canon imageRUNNERC1022 Service Manual Download Page 293

Page: 293 / 534

Chapter 11

11-11

F-11-9

6) Remove the front cover unit [1].

F-11-10

11.5.2 Front Upper Cover 1

11.5.2.1 Before Removing Front upper Cover 1

0019-6872

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF

1) Remove the ETB unit.

(page 8-30)

Reference [Removing the ETB Unit]

2) Remove the rear cover unit.

(page 11-12)

Reference [Removing the Rear

Cover Unit]

3) Remove the left cover.

(page 11-14)

Reference [Removing the Left Cov-

er]

4) Remove the right cover.

(page 11-12)

Reference [Removing the Right

Cover]

5) Remove the control panel unit.

(page 11-22)

Reference [Removing the

Control Panel Unit]

11.5.2.2 Removing Front Upper Cover 1

0019-6873

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF

1) Pull the delivery tray [1] out.
2) Move the delivery tray [1] in the direction of the arrow, and release the 2

projections [2] from the 2 claws [3] of the delivery tray cover to remove
the delivery tray.

F-11-11

3) Remove the 2 claws [2] and the 2 bosses [3] at both sides of front upper

cover 2 [1] in the direction of the arrow [A].

4) Move front upper cover 2 [1] in the direction of the arrow [B] and release

the 4 claws [4] to remove front upper cover 2.

F-11-12

5) Remove front upper cover 1 [1].

- 3 screws [2]
- 2 claws [3]
- 2 bosses [4]

[1]

[2]

[1]

[2]

[1]

[3]

[2]

[4]

[3]

[1]

[2]

[3]

[A]

[B]

Summary of Contents for imageRUNNERC1022






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNERC1022

Reviews:

Related manuals for imageRUNNERC1022

Brands by name

Popular brands

Canon imageRUNNERC1022, Service Manual

Search results

Summary of Contents for imageRUNNERC1022

Reviews:

Related manuals for imageRUNNERC1022

Brands by name

Popular brands