Canon imageRUNNERC1022, Service Manual

Page: 62 / 534

Chapter 1
1-40
T-1-37
Communication Settings *4
T-1-38
System Management Set. > Network Settings
Item Settings
E-mail/I-Fax *4
SMTP Receive OFF */ON
POP OFF */ON
SMTP Sever
Name of superior server of E mail, I-Fax
Max 48 characters
Enter IP address in the case that a DNS server is not provided. In the case that an IP address for the DNS server
is registered, enter a name that the DNS server can understand.
Ex.: mail_server.ccm.canon.co.jp
E-mail Address
Account for sending E mail, I-Fax
Max 64 characters
Ex.: account@a01.ccm.canon.co.jp
POP Server
POP server name for receiving I-Fax using POP
Max 48 characters
Enter IP address in the case that a DNS server is not provided. In the case that an IP address for the DNS server
is registered, enter a name that the DNS server can understand.
POP Address
Account for receiving I-Fax using POP
Max 32 characters
POP Password
Password for receiving I-Fax using POP
Max 32 characters
POP Interval 0 to 99 Minutes (Transmission with POP is not implemented when 0 is set.) *0
Authentication / Encryption
POP Auth. Before Send OFF*/ON
SMTP Authentication OFF*/ON
User Name Max 64 characters (Can be set when SMTP authentication is ON)
Password Max 32 characters (Can be set when SMTP authentication is ON)
System Management Set. > Communication Settings *4
Item Settings
E-mail/I-Fax Settings
Send Data Size Limit 0 to 99MB, in 1MB unit (3MB*)
Divide TX Data Oversize. OFF*/ON
Default Subject Max 40 characters (Attached Image*)
Fax Settings
Send Start Speed 33600*/14400/9600/7200/4800/2400 bps
Receive Start Speed 33600*/14400/9600/7200/4800/2400 bps
R-key Setting PSTN */ PBX Switch method: PREFIX(prefix code), HOOKING
Memory Lock Settings
Use Memory Lock OFF*/ON
Memory Lock Password Max. 7 digits
Report Print OFF*/ON
Memory Lock Time Settings Do not Specify *, Specify
Memory Lock Start Settings Time setting
Memory Lock End Settings Time setting