pg. 53
Field Remedy
When the symptom occurred, prepare the pre-registration guide sheet(FE2-0547-000) and attach it onto
the pre-registration guide assembly according to the below procedure:
1) Remove the right door assembly [3], and then the pre-registration guide assembly [1].
2) Remove the screws on the front side [4]/ rear side [7] of the pre-registration guide assembly.
3) Loosen the screw either on the front side [6] or rear side [7] of the pre-registration guide assembly to
remove the crossing guide [8].
[Caution] When handling with the pre-registration guide assembly [1], make sure that the sheet-metal
parts, the crossing guide [8] and the pre-registration guide [9], do not get deformed.
4) On the registration guide [9], clean the position[a], where the pre-registration guide sheet is to be
attached, with alcohol.
5) Attach the pre-registration guide sheet[2] onto the pre-registration guide [9] following to the standards
shown below.
-Front-rear direction: Match the edges of the pre-registration guide sheet [2] and the pre-registration guide
[9] [b].
