Canon imageRUNNER ADVANCE 6055 Series, Service Manual

Page: 866 / 1406

8
8
8-84
8-84
Service Mode > COPIER > ADJUST > HV-TR
Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
TR-OFS5 Adj transfer tgt current offset:Special1
Lv.2 Details To adjust the offset value of the target current of the Transfer Roller
for special paper 1.
Set the environment (temperature and humidity), feed mode, and
Transfer Roller target current offset value in the order from left.
When the actual usage status matches to the environment and feed
speed set in this item and the paper type (special paper 1) set in TR-
SP1, the specified offset value is added to the Transfer Roller target
current.
Use case When transfer failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
Environment: 0 to 4
0: No specification, 1: Environment 1and 2, 2: Environment 3 to 5, 3:
Environment 6 and 7, 4: All environments
Feed mode: 0 to 7
0: No specification, 1: Cassette/3.5K deck 1-sided, 2: Cassette/3.5K
deck 2-sided, 3: Multi-purpose Tray 1-sided, 4: Multi-purpose Tray
2-sided, 5: Large deck 1-sided (only POD Deck Lite), 6: Large deck
2-sided (only POD Deck Lite), 7: All modes
Transfer Roller target current offset value: -10 to 10
Unit 5 micro A
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-OFS1 to 4, 6, TR-SP1
COPIER > ADJUST > HV-TR
TR-OFS6 Adj transfer tgt current offset:Special2
Lv.2 Details To adjust the offset value of the target current of the Transfer Roller
for special paper 2.
Set the environment (temperature and humidity), feed mode, and
Transfer Roller target current offset value in the order from left.
When the actual usage status matches to the environment and feed
speed set in this item and the paper type (special paper 2) set in TR-
SP2, the specified offset value is added to the Transfer Roller target
current.
Use case When transfer failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
Environment: 0 to 4
0: No specification, 1: Environment 1and 2, 2: Environment 3 to 5, 3:
Environment 6 and 7, 4: All environments
Feed mode: 0 to 7
0: No specification, 1: Cassette/3.5K deck 1-sided, 2: Cassette/3.5K
deck 2-sided, 3: Multi-purpose Tray 1-sided, 4: Multi-purpose Tray
2-sided, 5: Large deck 1-sided (only POD Deck Lite), 6: Large deck
2-sided (only POD Deck Lite), 7: All modes
Transfer Roller target current offset value: -10 to 10
Unit 5 micro A
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-OFS1 to 5, TR-SP2
TR-L-OF1 Adj lead edge trns tgt crrnt ofst:Plain
Lv.2 Details To adjust the leading edge transfer target current and the offset value
of leading edge transfer bias output timing for plain paper.
Use case When a drum separation failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
Leading edge transfer target current offset value: -2 to 10
Offset value of leading edge transfer bias output timing: 0 to 20
Unit 5 micro A, 1 mm
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-L-OF2 to 6
TR-L-OF2 Adj lead edge trns tgt crrnt ofst:Heavy1
Lv.2 Details To adjust the leading edge transfer target current and the offset value
of leading edge transfer bias output timing for heavy paper 1.
Use case When a drum separation failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
Leading edge transfer target current offset value: -2 to 10
Offset value of leading edge transfer bias output timing: 0 to 20
Unit 5 micro A, 1 mm
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-L-OF1, 3 to 6