Canon imageRUNNER ADVANCE 6055 Series, Service Manual

Page: 157 / 1406

2
2
2-103
2-103
Technology > Fixing > Controls > Fixing temperature control
Technology > Fixing > Controls > Fixing temperature control
● Temperature Control for Standby
To provide measures against temperature rise of the coil/Main Body and save energy
consumption, the target temperature is reduced step by step on a specified time basis until it
reaches a certain temperature.
190
185
180
1
5
10
Fixing Roller
temperature(deg C)
Time(min)
F-2-133
The control temperature depends on the environment temperature/country. The details on the
control temperature are shown below.
• Normal environment 17 degC or higher
Destination Model Time (minute)
0 to 1 1 to 5 5 to 10 10 and
longer
Japanese imageRUNNER ADVANCE 6075 185 180 175 170
mageRUNNER ADVANCE 6065 185 180 175 170
imageRUNNER ADVANCE 6055 180 175 170 170
Non Japanese imageRUNNER ADVANCE
6075/6065/6055
190 185 180 175
• Low temperature environment Lower than 17 degC
Destination Model Time (minute)
0 to 5 5 to 10 10 to 20 20 and
longer
Japanese imageRUNNER ADVANCE
6075/6065/6055
190 185 180 175
Non Japanese imageRUNNER ADVANCE
6075/6065/6055
195 190 185 180
NOTE:
When restoring from the recovery mode, temperature control is conducted from the
2nd line of temperature control table.
T-2-59
T-2-60