Canon imageRUNNER ADVANCE 6055 Series, Service Manual

Page: 818 / 1406

8
8
8-36
8-36
Service Mode > COPIER > DISPLAY > CCD
Service Mode > COPIER > DISPLAY > CCD
COPIER > DISPLAY > CCD
OFST2-BW Img Sensor offset value (B&W) [Back]
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the CMOS Sensor offset value at B&W scanning.
Use case When image failure occurs at back side scanning in B&W mode.
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 96
Appropriate target value 1 to 95
GAIN-BW1 Img Sensor gain level adj VL1(B&W): frt
Lv.2 Details To display the CMOS Sensor B&W gain level adjustment value 1 of
Scanner Unit (paper front).
Use case When image failure occurs at front side scanning in B&W mode
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
GAIN-BW2 Img Sensor gain level adj VL2(B&W): frt
Lv.2 Details To display the CMOS Sensor B&W gain level adjustment value 2 of
Scanner Unit (paper front).
Use case When image failure occurs at front side scanning in B&W mode
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
GAIN-BW3 Img Sensor gain level adj VL3(B&W): frt
Lv.2 Details To display the CMOS Sensor B&W gain level adjustment value 3 of
Scanner Unit (paper front).
Use case When image failure occurs at front side scanning in B&W mode
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
GAIN-BW4 Img Sensor gain level adj VL4(B&W): frt
Lv.2 Details To display the CMOS Sensor B&W gain level adjustment value 4 of
Scanner Unit (paper front).
Use case When image failure occurs at front side scanning in B&W mode
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
GAIN2BW1 Img Sensor gain level adj VL1(B&W): Back
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the CMOS Sensor B&W gain level adjustment value 1 of
Scanner Unit (paper back).
Use case When image failure occurs at back side scanning in B&W mode.
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
COPIER > DISPLAY > CCD
GAIN2BW2 Img Sensor gain level adj VL2(B&W): Back
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the CMOS Sensor B&W gain level adjustment value 2 of
Scanner Unit (paper back).
Use case When image failure occurs at back side scanning in B&W mode.
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
GAIN2BW3 Img Sensor gain level adj VL3(B&W): Back
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the CMOS Sensor B&W gain level adjustment value 3 of
Scanner Unit (paper back).
Use case When image failure occurs at back side scanning in B&W mode.
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
GAIN2BW4 Img Sensor gain level adj VL4(B&W): Back
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the CMOS Sensor B&W gain level adjustment value 4 of
Scanner Unit (paper back).
Use case When image failure occurs at back side scanning in B&W mode.
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47
GAIN2-OR Gain level of Img Sensor odd bit(R): bck
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the Red gain level adjustment value in odd-numbered bit
on CMOS Sensor of Scanner Unit (paper back).
Continuous display of upper limit is considered a failure of the
Scanner Unit/Reader Controller PCB.
Use case - When replacing the Reader Controller PCB
- At scanned image failure
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 48
Appropriate target value 1 to 47