Canon imageRUNNER ADVANCE 6055 Series, Service Manual

Page: 1276 / 1406

9
9
9-279
9-279
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Mirroring Board or Encryption Board and HDD Case Unit
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Mirroring Board or Encryption Board and HDD Case Unit
11) Secure the Signal Cable and the Power Supply Cable in place using the 3 Wire Saddles.
x3
CAUTION:
Check that the connector of the Signal Cable is connected properly and that the cable
is not overloaded.
F-9-566
F-9-565
12) Put the CH B cable through the Wire Saddle.
13) Fold the extra length of the CH A cable, and secure it with the Wire Saddle.
CAUTION:
• Be sure that the cable is not in contact with the stepped screw [A] of Drawer.
• When securing the cable, be sure that it does not go over to the front.
• When the FAX Board is installed, be sure to avoid contact of the cable with the PCB
to secure the cable.
[A]
CH B
CH A
F-9-567