Canon imageRUNNER 5065 series, Service Manual, Page: 43 / 596

Chapter 1
1-13
1.2.3.8 Box Settings
0015-4325
iR5065 / iR 5055 / iR5075 / / /
*Factory settings.
**Indicated when the appropriate accessory is installed.
T-1-12
1.2.3.9 Printer Settings
0015-4326
iR5065 / iR 5055 / iR5075 / / /
*Factory settings.
**Indicated in the presence of a specific accessory.
T-1-13
volume adjust
alarm volume: 0 to 8 (84)
communication volume: 0 to 8 (*4)
off-hook alarm: (*ON/OFF)
fax transmission function setup** ECM transmission (*ON/OFF)
set pause length: 1 to 15 seconds (*2 seconds)
auto redial: (*ON/OFF)
number of redial sessions: 100V: 1-15(*2)
interval of redial session (min): 2 to 99 (*2)
redial at transmission error: 1st and error pages/all pages/off
pre-transmission dial tone check: (*ON/OFF)
fax reception function setup** ECM reception: (*ON/OFF)
select reception mode
*Automatic reception / modem dial-in FAX/TEL switch
fax/tel switchover: at ring start: 0 to 30 sec (*8), ring length: 15 to 300 sec (*17), post-ring operation:
end/*receive, voice answer: ON/*OFF
auto reception
modem dial-in fax/tel switchover
ring sound: ON (number of rings: 0 to n)/*OFF
remote reception: ON (remote reception ID: 00 to 99, *25)/*OFF
auto reception switchover: 1 to 99 seconds, *15 seconds)/*OFF
fax addition line setup** register user telephone number: 20 characters max.
register user abbreviation: 24 characters max.
select type of line: *20 pps/10 pps/push
select transmission line:
line 1: *priority on transmission/do not permit transmission
line 2: priority on transmission/do not permit transmission
Mode Description
set/register user box select box: 0-99
register box name: 24 characters max(one-byte characters).
ID No.: 0-9999999
file auto delete: 0=none, 1, 2, 3, 6, 12 hr; 1, 2, *3, 7, 30 days
URL transmission setup
Print when saving data from the print driver: ON/*OFF
reset
print photo mode (ON/*OFF)
read setup standard mode register/reset
set/register fax box** select box: 0-49
register box name: 24 characters max(one-byte characters).
ID No.: 0-9999999
set URL transmission
reset
Mode Description
settings number of copies: 1 to 9999 (*1)
duplex: duplex/*simplex
pickup
default paper size: *A4 (additional 10 possible)
default paper type: plain (additional 8 possible)
paper size replacement: replace/*do not replace
adjust print
**super smooth: *use/do not use
**toner density: 1 to 9 (*5)
toner save: enable/*disable
thin line correction: *enable/Disable
Correction of horizontal lines: *Disable/Level 1/Level 2/Level 3/Level 4
Correction of horizontal lines: *Disable/Level 1/Level 2/Level 3/Level 4
Resolution: Super Fine/*Fine
layout
bind position: *Staple the long side/Staple the short side
bind margin: -50to+50mm (*0.0)
Distance to move the stapling position in a direction of the short/long side (front/back): -50to+50mm
(*0.0)
Mode Description