manualshive.com logo in svg

Canon imageRUNNER 5065 series, Service Manual

Share
Download
Canon imageRUNNER 5065 series Service Manual Download Page 259

Chapter 8

8-43

F-8-143

8.10.34 Feeding Belt

8.10.34.1 Before Removing the feeding belt 

0015-5227

iR5065 / iR 5055 / iR5075 /  /  / 

1) Detach the duplexing feed front cover.

(page 

10-

12)

Reference[Removing the Duplexing Feed Front Cover]

2) Remove the duplex feeding unit.

(page  8-44)

Reference[Removing the

Duplex Feeding Unit]

3) Detach the fixing front cover.

 

(page  10-14)

Reference[Removing the

Fixing Front Cover]

4) Detach the fixing upper cover.

 

(page  10-13)

Reference[Removing the

Fixing Upper Cover]

5) Detach the fixing/feeding unit front cover. 

(page 

10-

13)

Reference[Removing the Fixing/Feeding Unit Front Cover]

6) Detach the fixing/feeding unit middle cover. 

(page 

10-

13)

Reference[Removing the Fixing/Feeding Unit Middle Cover]

7) Remove the fixing drive assembly.

 

(page  10-20)

Reference[Removing

the Fixing Drive Assembly]

8.10.34.2 Removing the feeding belt 

0015-5231

iR5065 / iR 5055 / iR5075 /  /  / 

1) Free the harness from the wire saddle [3], and slide the harness guide [4].

- 1 connector [1]

- 1 screw [2]

F-8-144

2) Detach the fixing feeding unit release lever support plate [2].

- 2 screws [1]

F-8-145

3) Remove the 2 screws [3].

- 1 E-ring [1]

- 1 bearing [2]

F-8-146

4) Remove the feeding belt unit [7].

- 1 E-ring [1]

- 1 pulley [2]

- 1 pin [3]

- 1 screw [4]

- 1 E-ring [5]

- 1 bearing [6]

F-8-147

5) Detach the cover [2].

- 1 screw [1]

6) Remove the feeding belt [3] and the postcard belt [4].

F-8-148

[1]

[2]

[4]

[3]

[1]

[2]

[1]

[2]

[1]

[3]

[2]

[7]

[4]

[5]

[3]

[2]

[1]

[6]

[3]

[4]

[2]

[1]

Summary of Contents for imageRUNNER 5065 series





















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands