Canon ImageRunner 4051 Basic Operation Manual Download Page 112

Page: 112 / 180

112

Gently push the paper drawer back into the machine until it clicks into place in

the closed position .

If the Paper Deck Unit-B2 was moved away from the main unit, reconnect it to the main unit.

Follow the instructions on the screen .

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper

jam is cleared.

Paper Deck Unit-B2 (Optional)

Move the paper deck unit away from the main unit .

1.■ Press■the■release■button.

2.■ Move■the■paper■deck■unit■

away■from■the■main■unit.

When returning the paper drawer to its original position, be careful not to get your fingers

caught, as this may result in personal injury .

Summary of Contents for ImageRunner 4051





















































































































































































Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands

Canon ImageRunner 4051, Basic Operation Manual

Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands