Canon ImageRunner 4051 Basic Operation Manual Download Page 34

Page: 34 / 180

• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/

PIN). If the Copy Card Reader-F1 is attached, first insert a control card.

• If a login service such as Department ID Management or SSO-H has been set, press

(Log In/Out) to log out.

This section describes the flow of basic scan and send operations.

Sending Scanned Data (E-Mail/I-Fax/File Servers)

Selecting■Function

Select■[Scan■and■Send]■from■the■Main■Menu■screen.

Press [Scan and Send].

Scan and Send Basic Features screen is displayed.

Placing■Originals

Place■the■original■on■the■feeder■or■the■platen■glass.

Placing■originals■in■the■feeder

Adjust the slide guides to fit the size of your originals. Neatly place
your originals with the side to be copied face up.

Placing■originals■on■the■platen■glass

Open the feeder/platen cover.

Place your originals face down.

Gently close the feeder/platen cover.

You can set various send functions. For more
information, see from p. 36 to p. 39 in this manual.

Summary of Contents for ImageRunner 4051





















































































































































































Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands

Canon ImageRunner 4051, Basic Operation Manual

Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands