Canon ImageRunner 4051 Basic Operation Manual Download Page 66

Page: 66 / 180

Open the paper deck unit .

1.■ Press■the■open■button.

2.■ Open■the■paper■deck■unit.

The■inside■lifter■automatically■

descends■to■the■paper■loading■

position.

If the machine is in the Sleep mode (the touch panel is not displayed, and only the main power indicator

is lit), you may be unable to open the paper deck unit. In this case, press the control panel power switch to

reactivate the machine, and then press the open button on the paper deck unit.

Prepare the paper to load .

Open■the■packaging■for■the■

paper,■and■remove■the■paper■

stack.

• For high-quality printouts, use paper recommended by Canon.

• Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding.

Summary of Contents for ImageRunner 4051





















































































































































































Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands

Canon ImageRunner 4051, Basic Operation Manual

Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands