Canon ImageRunner 4051, Basic Operation Manual

Page: 82 / 180

82
3
Insert a new staple cartridge into the staple case .
2
1
3
1.■ Insert■a■new■staple■cartridge.
2.■ Press■the■spring-loaded■
case■down■until■it■clicks■into■
place.
3.■ Remove■the■seal■holding■the■
staples■together,■by■pulling■
it■straight■out.
• Do not remove the seal that holds the staples together before you place the staple cartridge into the
staple case.
• Only one staple cartridge can be inserted at a time.
• Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.
4
Attach the staple case .
1
2
1.■ Gently■push■the■staple■case■
back■into■the■finisher■and■
push■down■firmly■until■it■is■
securely■in■place.
2.■ Close■the■front■cover■of■the■
finisher.
After the cover is closed, the stapler unit may automatically perform a “dry” stapling operation to reposition
the staples.
When closing the front cover of the finisher, be careful not to get your fingers caught, as this
may result in personal injury .