Canon ImageRunner 4051 Basic Operation Manual Download Page 102

Page: 102 / 180

102

Clearing Paper Jams

If a paper jam occurs, a screen indicating the location of the paper jam and how to clear the jam appears on the touch

panel display. Follow the instructions on the screen to clear the paper jam. The screen is displayed repeatedly until the

paper jam is cleared. If you press [Close], you can continue operations, such as setting modes or scanning originals, even if

the jammed paper is not removed immediately.

Some areas inside the machine are subject to high-voltages . When removing jammed paper or when

inspecting the inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch

the inside of the machine, as this may result in burns or electrical shock .

• When removing jammed originals or paper, take care not to cut your hands on the edges of the

originals or paper . If you cannot remove the paper, contact your local authorized Canon dealer .

• When removing paper which has become jammed inside the machine, take care not to allow the toner

on the jammed paper to come into contact with your hands or clothing, as this will dirty your hands or

clothing . If they become dirty, wash them immediately with cold water . Washing them with warm water

will set the toner, and make it impossible to remove the toner stains .

• When removing paper which has become jammed inside the machine, remove the jammed paper

gently to prevent the toner on the paper from scattering and getting into your eyes or mouth . If the

toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a

physician .

• The fixing unit and its surroundings inside the machine may become hot during use . When removing

jammed paper or when inspecting the inside of the machine, do not touch the fixing unit and its

surroundings, as doing so may result in burns or electrical shock .

• After clearing all paper jams, remove your hands from the machine immediately . Even if the machine is

not in operation, your hands, hair, or clothing may get caught in the feed rollers, which could result in

personal injury or damage if the machine suddenly starts printing .

• If a paper jam occurs in the feeder, you cannot continue operating the machine. Follow the directions on the touch panel

display to clear the paper jam. (See “Feeder,” on p. 115.)

• If the MEAP screen is displayed, a message appears on the bottom line of the touch panel display. Press

(Status

Monitor/Cancel)

→

follow the directions on the touch panel display to clear the paper jam.

• Some areas that are shown to have paper jams may not actually have paper jams. However, always check all locations

indicated on the touch panel display in the order that is given.

If paper is jammed in several locations, remove the jammed paper in the order indicated on the touch panel display.

Summary of Contents for ImageRunner 4051





















































































































































































Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands

Canon ImageRunner 4051, Basic Operation Manual

Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands