Canon ImageRunner 4051, Basic Operation Manual

Page: 78 / 180

78
3
Pull out the empty staple cartridge from the staple case .
PUSH
2 1
1
1.■ Press■the■areas■indicated■by■
PUSH■on■both■sides■of■the■
staple■case.
2.■ Once■you■have■released■the■
spring-loaded■case,■pull■out■
the■staple■cartridge.
4
Insert a new staple cartridge into the staple case .
2
1
3
1.■ Insert■a■new■staple■cartridge.
2.■ Press■the■spring-loaded■
case■down■until■it■clicks■into■
place.
3.■ Remove■the■seal■holding■the■
staples■together,■by■pulling■
it■straight■out.
• Do not remove the seal that holds the staples together before you place the staple cartridge into the
staple case.
• Only one staple cartridge can be inserted at a time.
• Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.
5
Gently push the staple case back into the finisher and push down firmly until it
is securely in place .