Canon ImageRunner 4051 Basic Operation Manual Download Page 110

Page: 110 / 180

110

Gently push the paper drawer back into the machine until it clicks into place in

the closed position .

If the Paper Deck Unit-B2 was moved away from the main unit, reconnect it to the main unit.

Follow the instructions on the screen .

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper

jam is cleared.

Cassette Feeding Unit-AF1 (Optional)

If the Paper Deck Unit-B2 is attached, move the paper deck unit away from the main unit before proceeding with this

procedure.

Open the paper drawer’s upper right cover and lower right cover .

1.■ Open■the■paper■drawer’s■

upper■right■cover.

2.■ Open■the■paper■drawer’s■

lower■right■cover.

When returning the paper drawer to its original position, be careful not to get your fingers

caught, as this may result in personal injury .

Summary of Contents for ImageRunner 4051





















































































































































































Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands

Canon ImageRunner 4051, Basic Operation Manual

Search results

Summary of Contents for ImageRunner 4051

Reviews:

Related manuals for ImageRunner 4051

Brands by name

Popular brands