Canon imageRUNNER 2830 Facsimile Manual Download Page 95

Page: 95 / 352

Dialing Methods

2-23

Basic Send

and Receiv

e Methods

❑

Select the desired destination

➞

press [Done].

NOTE

•

If the desired destination is not displayed, press [

▼

] or [

▲

] to scroll to the desired

destination.

•

To display the One-Touch Speed Dialing keys, press [Index Order].

•

If you want to select other destinations in alphabetical order, repeat the above
procedure.

The Fax Basic Features screen appears, and the fax numbers and names of the
selected destinations are displayed.

Press

(Start).

If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display

➞

press

(Start) once for each original. When scanning

is complete, press [Done].

Scanning starts, and the document is sent to the specified destination.

Summary of Contents for imageRUNNER 2830

































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2830

Reviews:

Related manuals for imageRUNNER 2830

Brands by name

Popular brands

Canon imageRUNNER 2830, Facsimile Manual

Search results

Summary of Contents for imageRUNNER 2830

Reviews:

Related manuals for imageRUNNER 2830

Brands by name

Popular brands