Canon imageRUNNER 2830 Facsimile Manual Download Page 126

Page: 126 / 352

Changing the Reception Mode

3-18

Speci

l F

x Fun

ons

Press [Special Features]

➞

[RX Mode].

Select [On] or [Off] for <Memory Lock> and/or <Forward>.

If a password has been set for the Memory Lock or Forward mode, enter the
password using

(numeric keys)

➞

press [OK].

The screen returns to the RX Mode screen.

NOTE

For instructions on setting or changing the password for the Memory Lock or
Forward mode, see "Saving Received Documents in Memory," on p. 6-7, and
"Automatic Forwarding of Received Documents," on p. 6-16.

Press [Done] repeatedly until the Fax Basic Features screen
appears.

The selected mode is set.

Summary of Contents for imageRUNNER 2830

































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2830

Reviews:

Related manuals for imageRUNNER 2830

Brands by name

Popular brands

Canon imageRUNNER 2830, Facsimile Manual

Search results

Summary of Contents for imageRUNNER 2830

Reviews:

Related manuals for imageRUNNER 2830

Brands by name

Popular brands