Protocol Settings
5-9
Using a NetBIOS Netw
o
rk
(Windo
ws)
5
14
Specify the [Scope ID] setting.
Enter the Scope ID when necessary.
The Scope ID is an identifier for determining the range available to a printer or
computer.
Regardless of the [WINS Configuration] setting, a Scope ID is referred to from the
network.
IMPORTANT
•
When you set a Scope ID, the machine cannot communicate with any computer
whose Scope ID is different from the Scope ID you set here.
•
If any Scope ID is not set on computers in your network environment, leave this
setting blank.
15
Confirm the settings you specified, and then press [OK].
The display returns to the TCP/IP Settings screen.
16
Press [Done].
Repeat this step until the Additional Functions screen closes.
17
Restart the machine.
▼
Turn OFF the machine, wait at least three seconds, and then turn it ON again.
The protocol settings are completed.
201std(US)NWG.book Page 9 Wednesday, January 30, 2002 7:10 PM