Protocol Settings
5-3
5
Using a NetBIOS Netw
o
rk
(Windo
ws)
Protocol Settings
You can specify the protocol settings for the machine using any of the following:
•
Control panel
•
NetSpot (Utility software provided with the machine)
•
Web browser (Remote UI)
IMPORTANT
•
When configuring the TCP/IP settings for the first time, use the control panel of this
machine or NetSpot. After configuring the settings, you can change the content by using
a web browser (Remote UI).
NOTE
•
For instructions on entering settings using NetSpot, see “Chapter 7 Using the Network
and Device Settings with NetSpot.”
•
For instructions on entering settings using a web browser (Remote UI), see “Chapter 2
Functions of the Remote UI” in the Remote UI Guide.
Settings from the Control Panel
IMPORTANT
•
Settings specified from the control panel become effective after the machine is restarted
after the procedure.
•
For information on entering characters using the touch panel display, see “Chapter 1
Before You Start Using This Machine” in the Reference Guide.
TCP/IP Settings
1
Specify the TCP/IP settings.
If you have not entered the TCP/IP settings yet, enter them now (see “TCP/IP
Settings,” on p. 3-4 in “Chapter 3 Using a TCP/IP Network (Windows/ UNIX/
Macintosh)”).
Next, specify the SMB and WINS settings.
201std(US)NWG.book Page 3 Wednesday, January 30, 2002 7:10 PM