manualshive.com logo in svg

Canon imageRUNNER 105, Network Manual

Share
Download
Canon imageRUNNER 105 Network Manual Download Page 102

NetWare Print Service Settings

4-3

Using a NetW

a

re Netw

o

rk

 (Windo

ws)

4

NetWare Print Service Settings

To print using a NetWare network, you need to specify print service settings 
including print server and queue settings. You can use any of the software below to 
specify the print service settings from your computer.

•

NWADMIN or PCONSOLE (Novell software provided with NetWare)

IMPORTANT

•

To specify the print service settings from NWADMIN, the computer must have Novell 
Client (NetWare Client by Novell) installed.

•

The following procedures describe a sample NetWare setup. Depending on your 
environment, the actual setup procedure may differ.

Types of Print Service

Before specifying print service settings, refer to the following descriptions to 
determine the type of print service you are using.

NOTE

•

Normally with NetWare 4.x or later, it is recommended that you use NDS print service. 
With NetWare 3.2, it is recommended that you use Bindery print service. This manual 
describes procedures for these two combinations only.

•

With NetWare 5.x, you can use NDPS (Novell Distributed Print Services). 
This manual does not describe NDPS settings. For NDPS settings, see the NetWare 
manual.

■

NDS (Novell Directory Service) and Bindery Mode

The machine network supports both NDS and Bindery mode.
Determine the appropriate mode according to the network environment you are using. (If 
you are using NetWare 3.2, only the Bindery mode is available.)

■

Queue Server Mode and Remote Printer Mode

The machine supports both queue server mode and remote printer mode.

•

Queue Server Mode

When the machine is used in the queue server mode, all print server functions are 
provided by the machine itself; no other print server hardware or software is required. In 
NDS queue server mode (NDS PServer), the NDS print server is used for printing. In 
Bindery queue server mode (Bindery PServer), the Bindery print server is used for 
printing. In queue server mode, a separate NetWare user operating licence is required for 
each machine.

 201std(US)NWG.book  Page 3  Wednesday, January 30, 2002  7:10 PM

Summary of Contents for imageRUNNER 105









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands