2
2
2-8
2-8
Procedure of Replacement/Cleaning > Fixing area > Replacing the Fixing Assembly > Replacement procedure
Procedure of Replacement/Cleaning > Fixing area > Replacing the Fixing Assembly > Replacement procedure
3) Press the 2 Release Springs [1] at both sides of the rail to release the locks, and further
pull out the Fixing Feed Unit [2] until it stops.
[1]
[1]
[2]
F-2-13
CAUTION:
Do not release the locks of the 2 Release Springs [3] at the rear on the rails of both
sides.
Pulling out the Fixing Feed Unit [2] further than the trailing edge [A] of the Release
Springs at the rear side may cause the unit to fall (when the red screw [4] securing the
Fixing Feed Unit Rail has come off).
[1]
[3]
[3]
[A]
[A]
[2]
[4]
F-2-14
