1
1
1-13
1-13
Initial Setup > Basic Operation > Clearing the Counter > Procedure for Clearing the Counter of the Fixing Assembly
Initial Setup > Basic Operation > Clearing the Counter > Procedure for Clearing the Counter of the Fixing Assembly
2) On the warning list screen or the replaceable parts list screen, select the part of the Fixing
Assembly which has triggered the warning, and press [Counter Operation].
NOTE:
If the confirmation screen for clearing the counter appears, perform step 4.
3) Select the ID of the Fixing Assembly you wrote down in step 1, and press [OK].
NOTE:
If the ID of the Fixing Assembly you wrote down in step 1 is not displayed, select [No
ID]. In addition, let the service technician know that the Fixing Assembly ID is not
displayed.
F-1-19
F-1-20
-> The confirmation screen for clearing the counter will appear.
4) Press [Yes].
-> The count clear completion screen will appear.
Count clear can be executed whether in the Replacement/Cleaning mode or not. If executing
count clear in the Replacement/Cleaning mode, the message will be shown on the screen to
confirm Replacement/Cleaning mode termination after clear.
F-1-21
F-1-22
F-1-23
