1
1
1-33
1-33
Initial Setup > Adjustments/Settings > Adjustment/Maintenance Menu screen > Automatic Color Tone Correction
Initial Setup > Adjustments/Settings > Adjustment/Maintenance Menu screen > Automatic Color Tone Correction
5) Select the paper source that contains Hammermill Color Copy Digital (28lb. (105 g/m
2
)) or
paper to adjust -> press [OK].
CAUTION:
If you correct color tone using the registered correction pattern, you can only select
the paper source that contains the same type of paper as you used for test page when
registering the selected correction pattern.
NOTE:
The name of the paper is subject to change without notice. For more information,
contact with service technician.
6) Press [Start Printing].
-> Test page is output.
7) Place the test page face down on the platen glass -> press [Start Scanning].
Place the test page face down, with the gray bar along the left edge of the platen glass.
8) Remove the test page from the platen glass.
●
Registering Correction Pattern
You can create and register correction patterns for desired paper type.
CAUTION:
To perform the procedure described in this section, you must log in to this machine as
an administrator.
1) In Adjustment/Maintenance menu screen, press [Auto Correct Color Tone Settings].
-> Automatic color tone correction screen is displayed.
2) Press [Register Correction Pattern].
F-1-61
F-1-62
