![background image](http://html1.mh-extra.com/html/canon/imageformula-dr-9080c/imageformula-dr-9080c_service-manual_4188138115.webp)
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 33
CHAPTER 3 DISASSEMBLY & REASSEMBLY
14. Delivery drive roller
1) Detach the right/left cover assembly and top
cover.
2) Let the left belt loosen. Refer to the "Left belt"
section.
3) Unfasten two E-rings (one on each side)
,
detach the pulley
and the pin
.
Additionally, remove two bearings
(one on
each side) and detach the delivery drive roller
.
E-ring
Pulley
Pin
Bearing
Delivery drive roller
Fig. 3-328
15. Right belt
1) Remove the right cover assembly.
2) Loosen four screws
of the main motor
mount plate
and detach the belt
.
Main motor mount plate
Screw
Belt
Fig. 3-329
Precautions during assembly
•
Do not allow any slack in the belt. Adjust the
tension so that the belt does not miss the
sprockets and the tension is not tightened too
much.
Summary of Contents for ImageFormula DR-9080C
