COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 27
CHAPTER 3 DISASSEMBLY & REASSEMBLY
7. Feeder follower rollers 1, 2, and 3
1) Dismount the upper unit.
2) Remove twelve screws
(six on each side)
and detach feed guide plates 1
, 2
, and
3
.
Note:
When detaching feed guide plate 1,
remove the back side of feed guide plate 1
and slide it to the right to unhook the fit on
each side of the front side.
Screw
Feed guide plate 1
Feed guide plate 2
Feed guide plate 3
Fig. 3-316
3) Press the claw of the stopper
from within
and detach the feeder follower roller
assemblies 1, 2, and 3
.
Claw of the stopper
Feeder follower roller assemblies
Fig. 3-317
4) Detach the stopper assembly. Refer to the
section entitled "Upper registration roller".
Summary of Contents for ImageFormula DR-9080C
