![background image](http://html1.mh-extra.com/html/canon/imageformula-dr-9080c/imageformula-dr-9080c_service-manual_4188138087.webp)
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 5
CHAPTER 3 DISASSEMBLY & REASSEMBLY
3) Rotate the delivery tray assembly
.
Remove six screws
, unhook two claws
,
and release the front claw
by sliding it
frontward.
Release two collars
and detach both the
upper and lower eject tray assemblies.
Note:
Be careful not to damage the claw since it
is breakable.
Delivery tray assembly
Screw
Claw
Front claw
Collar
Fig. 3-113
4) Release
the
boss on each side by bending
the IP cover
to separate it from the upper
delivery cover
.
IP cover
Boss
Upper delivery cover
Fig. 3-114
6. Front delivery cover
1) Detach the upper delivery cover assembly.
2) Remove four screws
, pull down the roller
, and take off the front delivery cover
by
lifting it upward.
Screw
Roller cover
Front delivery cover
Fig. 3-115
Summary of Contents for ImageFormula DR-9080C
