![background image](http://html1.mh-extra.com/html/canon/imageformula-dr-9080c/imageformula-dr-9080c_service-manual_4188138122.webp)
3 - 40
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4. DC power supply PCB
1) Remove the rear cover.
2) Remove six screws
and pull out the DC
power supply PCB
.
Screw
DC power supply PCB
Fig. 3-506
3) Unhook two connectors
and detach the
DC power supply PCB
.
DC power supply PCB
Connector
Fig. 3-507
4) Remove four screws (with round-shaped tips)
and detach the panel
Screw
Panel
Fig. 3-508
Precautions during the assembly
•
The power switch should be in the OFF position
(in which the tip of the switch sticks out).
Connect connector 4P to CN1.
•
Since the tips of the three screws that fix the
panel will protrude, use the screws with
round-shaped tips to prevent injuries.
Summary of Contents for ImageFormula DR-9080C
