Canon im2520f, Setup Instructions, Page: 78 / 143

9211
– 5 –
4349-7741-02
■
Installing the Tray Unit
1. Make sure that the Paddle of the Finisher Unit is not advanced.
2. If the Paddle is advanced, push the solenoid shown and turn the Misfeed Clearing Dial
to bring the Paddle into its retracted position.
10. Loosen the adjusting screw and move the
Finisher Unit to the right or left as necessary
(one screw).
11. After the adjustment has been made, tighten
the adjusting screw.
4349U029AC
4349U031AA 4349U030AA
Paddle
<NG> <OK>
3. Mount the Tray Unit onto the Finisher Unit.
NOTE
Use utmost care to prevent the Tray Unit
from contacting the solenoid and motor of
the Finisher Unit.
4349U057AA
Motor Solenoid
4. Using Screws A, secure the Tray Unit by
tightening the screws in the order shown in
the illustration (six screws).
4349U033AA
5
1
3
6
2
4