Canon im2520f, Setup Instructions, Page: 22 / 143

9218
– 7 –
4348-7743-03
■
Adjusting the Paper Reference Position (2)
■ Installing the Ornamental Cover
■ Affixing the Paper Size Label
1. Press the Paper Descent button and then
slide out the drawer from the Large Capacity
Cabinet.
4348U010AA
2. Open the Right Door.
3. Loosen the adjusting screw and turn screw D
clockwise or counterclockwise as necessary.
NOTE
Use care not to damage or dent the paper
path surface inside the Right Door.
4348U011AA
•
If width A is greater than the specified value,
turn screw D counterclockwise.
4002U106AA
• If width A is smaller than the specified value,
turn screw D clockwise.
4002U105AA
4. Let the copier produce another test print and
check for the good paper reference position.
5. Make the adjustment until the specified
reference position is achieved.
6. Press the Panel Reset key to recall the Tech.
Rep. Mode to the screen.
7. Touch “Exit” on the Tech. Rep. Mode screen
to go back to the initial screen
1. Press the Paper Descent button and then
slide out the drawer from the Large Capacity
Cabinet.
2. Install the Ornamental Cover attached to the
copier (two screws).
3. Slide the drawer back in.
4348U050AA
4348U010AA
1. Affix the Paper Size Label furnished with the
Large Capacity Cabinet to the location
shown in the illustration.
4348U007AA