Canon GP215 Service Handbook Download Page 99

Page: 99 / 217

PCBs

6–13

ARRANGEMENT AND FUNCTIONS OF ELECTRICAL PARTS

Ref.

Name

Image processor PCB

DC controller PCB

Composite power supply PCB

Analog processor PCB

Laser driver PCB

Laser scanner motor driver

Fixing heater driver

Options power supply

Intensity adjusting sensor

BD PCB

Noise filter

Pick-up unit PCB

Cassette size detection (upper)

Cassette size detection (lower)

Pre-exposure lamp PCB

Multifeeder paper width detection PCB

Service switch PCB

LCD intensity adjustment PCB

Description

Processes images.

Controls DC loads.

Provides HVT/lamp regulator/DC power.

Drives the CCD/processes analog images.

Drives the laser unit.

Drives the laser scanner motor.

Drives the fixing heater.

Provides power to the sorter/RDF.

Detects the intensity of the scanning lamp.

Detects the laser beam.

Removes electrical noise from AC power.

Controls the pick-up assembly sensors.

Detects the size of the upper cassette.

Detects the size of the lower cassette.

Removes residual charges from the photosensi-
tive drum.

Detects the width of paper in the multifeeder.

Controls the service switch.

Controls the LCD.

Summary of Contents for GP215

























































































































































































































Search results

Summary of Contents for GP215

Reviews:

Canon GP215, Service Handbook, Page: 99 / 217

Search results

Summary of Contents for GP215

Reviews: