manualshive.com logo in svg

Canon GP215, Service Handbook, Page: 159 / 217

Share
Download
Canon GP215 Service Handbook Download Page 159

7–51

SERVICE MODE

G. *4* FUNCTION (function mode)

•

Use this mode to operate the machine under a specific set of settings or execute auto adjustment.
(Check to make sure that  the machine is in standby mode before executing any item.)

•

Each press on the 

key brings up the next screen; each press on the 

key, on the other

hand, brings up the previous screen.

•

Press the item (notation) for operation or auto adjustment to highlight.

•

Press the 

key to execute the selected item.

•

Press the 

key to return to the Menu screen.

•

A press on the 

and a key on the keypad put the corresponding number into the parentheses

‘*4* FUNCTION1 –> (

)’; a press on the 

key then causes a leap to the corresponding page.

1. Clearing Errors

CANCEL

+

OK

*4* FUNCTION 01– > (   )

   ERROR (OK : CLEAR)

–

JUMP

Item

Clearing E000, E001, E003,
E004, E007-01, or E717

Description

To clear an error indication, press ‘ERROR’ on the
screen to highlight; then, press the OK key, and turn
OFF/ON the main power switch.

Reference

page

OK

CANCEL

JUMP

JUMP

Summary of Contents for GP215


























































































































































































































Reviews:

No comments