manualshive.com logo in svg

Canon GP215, Service Handbook, Page: 47 / 217

Share
Download
Canon GP215 Service Handbook Download Page 47

3–11

TROUBLESHOOTING IMAGE PROBLEMS

8

The copy has white spots. (vertical)

9

The copy has white lines. (vertical)

Cause

Exposure sys-
tem

Transfer charg-
ing roller,
Separation stat-
ic eliminator

Developing
assembly

Fixing assem-
bly

Fixing assem-
bly inlet

Photosensitive
drum

Dust-proofing
glass

Exposure sys-
tem

Standard white
plate

Step

1

2

3

4

5

6

7

8

Checks

Execute ‘L-TEET1’ in service
mode (*4*). Are there white
lines in the generated image?

Is there dirt or foreign matter
on the transfer charging roller
or the separation static elimina-
tor?

Is the coating of toner on the
developing cylinder even?

Are there scratches on the fix-
ing film in peripheral direction?

Is there dirt or foreign matter
on the fixing assembly inlet?

Are there scratches on the sur-
face of the photosensitive drum
in peripheral direction?

Replace the dust-proofing
glass. Is the problem correct-
ed?

Clean the standard white plate,
and No. 1, No. 2, and No. 3
mirrors. Is the problem correct-
ed?

Yes/No

YES

YES

NO

YES

YES

YES

YES

YES

NO

Action

Go to step 7.

Clean the transfer charging
roller or the separation static
eliminator.
If the problem is still not cor-
rected, replace the transfer
charging assembly or the sep-
aration static eliminator.

Check the edge of the devel-
oping assembly blade.
If toner is not in the developing
assembly, see “The ADD
TONER message fails to turn
ON.”

1. Replace the fixing assembly.
2. Clean the separation claw.
3. Check the separation claw.

Clean the area.

Replace the drum unit.
• Be sure to find out the

cause of the scratches.

End.

End.

Change the value of ‘ADJ-S’ in
service mode (*3*), and
change the point of shading
measurement.

Summary of Contents for GP215


























































































































































































































Reviews:

No comments