manualshive.com logo in svg

Canon GP215, Service Handbook, Page: 19 / 217

Share
Download
Canon GP215 Service Handbook Download Page 19

Steps

1) Enter the values recorded on

the label attached to the
composite power supply
PCB under the appropriate
items on the 3rd page in ser-
vice mode (*3*).

2) Execute ‘shading auto cor-

rection’ in service mode
(*4*).

3) Execute ‘PD density auto

correction’ (*4*), ‘200PWM
density auto correction’, and
‘600PWM density auto cor-
rection’.

1) Execute ‘shading auto cor-

rection’ in service mode
(*4*).

1) Execute ‘factory/R&D shad-

ing auto correction’ in ser-
vice mode (*4*).

1) Enter the values recorded on

the label attached to the fix-
ing assembly under ‘FIXER-
REGST’ and ‘FILM_LANK’ in
service mode (*3*).

2) Execute ‘FILM COMEBACK’

(14th page of  ‘FUNCTION’ ).

2-1) Press the  ‘OK’ key on the

LCD.

2-2) Check to make sure that

‘RUNNING’ has ended in
‘OK’ and the reading of
‘LEVEL’ is ‘5’ or there-
around.
If the operation ended in
‘NG’, visually check the
film for damage, and exe-
cute the mode once again.
If the operation ended in
‘OK’, turn off and then on
the main power without
touching the keys on the
control panel.

2–11

STANDARDS AND ADJUSTMENTS

Part

Composite power supply
PCB

Laser scanner unit

Laser unit

CCD unit

Analog processor PCB

Scanning lamp

DC controller PCB

Standard white plate

Fixing assembly

Service mode

*3* (Enter the values
recorded on the label.)
*4* Shading auto correction
*4* PD density auto correc-
tion
*4* 200PWM density auto
correction
*4* 600PWM density auto
correction

*4* Shading auto correction

*4* Factory/R&D shading
auto correction

*3* FIXER-REGST
*3* FILM LANK
*4* FILM_COMEBACK

Summary of Contents for GP215


























































































































































































































Reviews:

No comments