manualshive.com logo in svg

Canon GP215, Service Handbook, Page: 163 / 217

Share
Download
Canon GP215 Service Handbook Download Page 163

7–55

SERVICE MODE

5. 200PWM Density Auto Correction

•

You must execute this mode in combination with PD density auto correction and 600PWM density auto
correction.

CANCEL

+

OK

*4* FUNCTION 05 – > (   )

   200PWM PRINT (START)
     WHITE MEASURE (OK)
   DENSITY SAMPLING (OK)
   DATA SET
   A=+xxx, B=+xxx, D=+xxx
   xx   xx   xx   xx   xx   xx   xx
   xx   xx   xx   xx   xx   xx   xx
       MULTI             0
       >CASSETTE1     A4   1
       CASSETTE 2      A4   1

–

JUMP

Item

200PWM density auto correc-
tion

Description

1) Press ‘200PWM PRIT’ to highlight, and press the

Copy Start key.

• A 15-gradation test pattern will be generated.
2) Place a black sheet of paper (whitest of all used

by the user; no color copy paper allowed) on the
copyboard glass; press ‘WHITE MEASURE’ to
highlight, and press the OK key.

• The scanner makes a single scan.
3) Replace the paper with the test pattern generated

previously; press ‘DENSITY MEAUSRE’ to high-
light, and press the OK key.

4) Check the value of A, B, and D.
Insert
5) If the values are as indicated, press ‘DATA SET’

to highlight, and press the OK key.

Reference

page

Printed side down

Summary of Contents for GP215


























































































































































































































Reviews:

No comments