manualshive.com logo in svg

Canon GP215, Service Handbook, Page: 164 / 217

Share
Download
Canon GP215 Service Handbook Download Page 164

7–56

SERVICE MODE

6. 600PWM Density Auto Correction

•

This mode must be executed in combination with PD density auto correction and 200PWM density
auto correction.

CANCEL

+

OK

*4* FUNCTION 06 – > (   )

   600PWM PRINT (START)
     WHITE MEASURE (OK)
   DENSITY SAMPLING (OK)
   DATA SET
   A=+xxx, B=+xxx, D=+xxx
   xx   xx   xx   xx   xx   xx   xx
   xx   xx   xx   xx   xx   xx   xx
       MULTI             0
       >CASSETTE1     A4   1
       CASSETTE 2      A4   1

–

JUMP

Item

600PWM density auto correc-
tion

Description

1) Press ‘600PWM PRINT’ to highlight, and press

the Copy Start key.

• A 15-gradation test pattern will be generated.
2) Place a blank sheet of paper (whitest of all used

by the user; no color copy paper allowed) on the
copyboard glass; press ‘WHITE MEASURE’ to
highlight, and press the OK key.

• The scanner makes a single scan.
3) Replace the paper with the test pattern generated

previously; press ‘DENSITY MEASURE’ to high-
light, and press the OK key.

4) Check the value of A, B, and D.
Insert
5) If the values are as indicated, press ‘DATA SET’

to highlight, and press the OK key.

Reference

page

Printed side down

Summary of Contents for GP215


























































































































































































































Reviews:

No comments