manualshive.com logo in svg

Canon GP215, Service Handbook, Page: 166 / 217

Share
Download
Canon GP215 Service Handbook Download Page 166

7–58

SERVICE MODE

8. Checking the Control Panel Indications

CANCEL

+

OK

*4* FUNCTION 08 – > (   )
LCD-CHK

(OK : START)

SCANLANP (OK : START)
DISP-LED

(OK : START)

–

JUMP

Item

LCD-CHK
• checking for missing dots on

LCD

SCAN_LAMP
• checking activation of scan-

ning lamp

DISP-LED
• checking control panel LEDs

Description

1) Press ‘LCD-CHK’ to highlight.
2) Press the OK key.
• The entire face of the LCD reverses (white video;

keys and notations disappear).

3) Press the area where the OK key was shown.
• The entire face of the LCD reverses (black video).
4) Press the area where the OK key was shown.
• The LCD will return to normal state.

1) Press ‘SCAN_LAM’ to highlight.
2) Press the OK key.
• The scanning lamp will turn on.
3) Press the OK key.
• The scanning lamp will turn off.

1) Press ‘DISP-ED’ to highlight.
2) Press the OK key.
• The LEDs on the control panel will turn on.
3) Press the OK key.
• The LEDs on the control panel will turn off.

Reference

page

Summary of Contents for GP215


























































































































































































































Reviews:

No comments