Canon FAX-L250, User Manual

Page: 229 / 282

Message Error Code Cause Action
MEMORY FULL
PLEASE WAIT –
The FAX-L250 is sending a
fax and its memory is full.
Wait until the fax is sent. The
FAX-L250 continues to send
the fax as memory becomes
available.
MEMORY USED nn% –
Shows how much of the
FAX-L250’s memory is in
use.
If you need more memory, print
or send any documents stored
in memory.
NO ANSWER #005
The receiving fax machine
does not answer.
Make sure you dialled the
correct number. Try again later.
NO RX PAPER #012
The other party’s fax
machine is out of paper and
its memory is full.
Contact the other party and
have them add paper to their
fax machine.
NO TEL # #022
The one-touch or coded
speed dialling number has
not been registered.
Register the number.
NOT AVAILABLE –
In manual sending via the
handset, you tried to use a
one-touchspeed dialling
button or a coded speed
dialling code that has a
group registered in it.
In manual sending via the
handset, you cannot send a
document to multiple
destinations. Send the document
to one destination at a time.
PLEASE WAIT –
The FAX-L250 is warming
up.
Wait until the time and
receiving mode appear in the
LCD display, then begin.
REC’D IN MEMORY –
The paper or toner ran out,
or a paper jam occurred, so
the FAX-L250 received the
document in memory.
Add paper to the sheet feeder,
change the toner cartridge, or
clear the paper jam, as needed.
When the problem is solved, the
FAX-L250 automatically prints
the document stored in memory.
Error Codes, Messages, and Solutions
10-33