Canon FAX-L250 User Manual Download Page 127

Page: 127 / 282

If the receiving fax machine does not answer on the last attempt, the FAX-L250 displays BUSY/NO

SIGNAL

(if the unit is set not to print a report).

If this happens, try sending again later.

Cancelling Automatic Redialling

Automatic redialling cannot be cancelled with the

( STOP) button while the unit is waiting to

redial. To cancel do the following steps.

Wait until the FAX-L250 begins redialling.

While the FAX-L250 is waiting to redial, the

LCD displays AUTO REDIAL.

Press STOP.

The FAX-L250 asks you to confirm that you

want to cancel:

To cancel the redialling, press

The FAX-L250 beeps and alternates the

following displays:

The unit then prints an error report (if set to

print one).

You can also delete the document from memory. See

″

Deleting a Document Stored in

Memory

″

on page 5-37.

BUSY/NO SIGNAL

CALLING

CANCEL?

YES #NO

TX/RX CANCELLED

TX/RX NO

0002

PRINTING REPORT

Redialling

5-25

Summary of Contents for FAX-L250



























































































































































































































































































Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands

Canon FAX-L250, User Manual

Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands