Canon FAX-L250 User Manual Download Page 140

Page: 140 / 282

Resending a Document that Encountered an Error

If you get an error signal when sending a document from memory, you can try resending the document

to the same destination without having to scan it again.

■

Make sure that the ERASE FAILED TX setting in the TX SETTINGS is set to OFF.
See page 12-9 for details on changing the setting.

■

When the AUTO REDIAL setting in the TX SETTINGS is set to OFF, a document
that failed to be sent is also considered an error document.

Press FUNCTION, then MEMORY REF.

Use

to select MEM. RETRANSMIT.

Press START/COPY.

Use or to select the TX/RX number of the
document you want to resend.

If you are not sure of the TX/RX number of the

document you want to resend, print the list of

documents stored in memory. See page 5-35 for

details.

FUNCTION

MEMORY REF

FUNCTION

MEMORY REFERENCE

DELETE DOCUMENT

MEM. RETRANSMIT

TX/RX NO.

_0001

TX/RX NO

_0003

Sending Faxes

5-38

Summary of Contents for FAX-L250



























































































































































































































































































Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands

Canon FAX-L250, User Manual

Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands