Canon FAX-L250 User Manual Download Page 69

Page: 69 / 282

Entering Numbers, Letters, and Symbols

Each numeric button has a number and a group of uppercase and lowercase letters assigned to it. Use

the chart below to determine which number button to press for each character.

Press the

button to change between number mode, uppercase letter mode, and lowercase letter mode.

When you are in number mode,

″

appears on the right

of the LCD display.

When you are in uppercase letter mode,

″

appears on

the right of the LCD display.

When you are in lowercase mode,

″

appears on the

right of the LCD display.

To enter a symbol, press # repeatedly until the symbol you want appears. Press any
other button or

to enter the symbol and move the cursor.

Button

Uppercase

Lowercase

Uppercase

Lowercase

Number

Guidelines for Entering Information

3-3

Summary of Contents for FAX-L250



























































































































































































































































































Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands

Canon FAX-L250, User Manual

Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands